Standard HVAC Maintenance Plan

A Complete Ultimate Tune-N-Check

Depending on the season, this semi-annual service for your heating or air conditioning equipment includes:

Furnace Precision Tune-up includes:

• Inspection of furnace and heat exchanger.
• Test airflow for carbon monoxide.
• Test the ignition system for safe and proper operation.
• Test safety and control circuits for proper operation.
• Test the exhaust system for proper venting.
• Lubricate and clean exhaust blower motor/air vents.
• Measure and adjust gas pressure for peak efficiency.
• Lubricate all moving parts (per manufacturer.)
• Measure the amperage and voltage of the blower motor.
• Tighten and inspect all electrical wiring.
• Seal minor air leaks at the furnace.
• Test for gas leaks.
• Wipe down the furnace exterior.
• Test capacitors for proper operation.
• Measure temperature difference- supply/return.
• Inspect and adjust fan belt tension (if applicable.)
• Calibrate and level t-stat.
• Replace t-stat batteries at the time of visit if needed.
• Brush clean heat exchanger (open style only.)
• Test furnace burner for proper flame pattern

A/C Precision Tune-N-Check includes:

• Test contractor for burned or pitted contacts.
• Inspect electrical for exposed wiring.
• Monitor compressor for proper start-up amperage draw, running amperage draw, voltage drop and wiring connections.
• Calibrate, program and level t-stat.
• Monitor volts/amps on fan/motor.
• Lubricate and inspect bearing for wear
• Inspect indoor coil, if accessible style.
• Test safety devices for proper operation.
• Inspect disconnect box for proper fuse ratings and signs of burnt terminals.
• Tighten all electrical connections in disconnect and AC unit.
• Test capacitors for proper operation.
• Test the fan blade for balance.
• Remove debris from outside of the AC unit.
• Test service valves for proper operation.
• Measure the temperature difference between supply/return.
• Inspection of A/C blower and motor in the furnace.
• Seal minor air leaks at the A/C evaporator coil.